Skip to main content
—— Gear Review · Fins

SEAC Motus Freediving Fins

Technopolymer blade · Full foot · Interchangeable blade

A full-foot long fin with an interchangeable technopolymer blade, a 22 degree blade angle and a dual-density rubber pocket. It is not the fiberglass fin earlier versions of this page described: it sits in the same material class as the Cressi Gara Modular, with a clear sizing rule and camo blade options.

8.0 / 10
—— Verdict
Recommended as an all-round polymer long fin
SEAC · Fins
—— Price (USD)
See current price
Affiliate link · disclosed below
—— What we like
  • + Interchangeable blade in black or five camouflage colours
  • + Simple sizing rule from SEAC: your shoe size with 2-3 mm socks
  • + Dual-density pocket: harder sole, softer back (SEAC)
  • + SEAC lists freediving, spearfishing and dynamic apnea training among its uses
—— What to know
  • − Technopolymer, not fiberglass, so not a material step up from other polymer fins
  • − No US list price from SEAC
  • − SEAC publishes no blade length, weight or stiffness rating
— Section 01

Overview

The SEAC Motus is a full-foot long fin with an interchangeable technopolymer blade, sold for freediving, spearfishing and recreational diving. Earlier versions of this page described it as a fiberglass step up from plastic fins. SEAC's own catalogue describes the blade as technopolymer, the same material class as the Cressi Gara Modular, so the real choice between them is pocket fit, sizing and price. For a genuine material step up, see the fiberglass fins guide.

— Section 02

The Blade

SEAC describes the blade as a special technopolymer formulated for flexibility and responsiveness, set at 22 degrees to the foot pocket, an angle SEAC says gives more thrust with less strain on the legs and ankles. The blade is interchangeable and comes in black and five camouflage colours: grey, green, brown, red and blue. SEAC publishes no blade length, weight or stiffness rating.

— Section 03

Foot Pocket and Sizing

The closed-shoe pocket is thermoplastic rubber in two densities: a harder sole and a softer section at the back of the foot. SEAC says the fins can be worn barefoot or with neoprene socks, and recommends 2-3 mm socks with Motus fins in the same size as the shoes you wear every day. Sizes run 36/38, 39/40, 41/42, 43/44, 45/46 and 47/48.

— Section 04

What SEAC Builds It For

SEAC lists the Motus for underwater fishing, freediving and recreational diving, and calls it suitable for intensive fin training for dynamic apnea. The camouflage blades are aimed at the spearfishing side of that list.

— Section 05

When to Move On

Because the Motus is a polymer fin, the next material step is fiberglass or carbon. Molchanovs, for example, lists its SPORT Bifins 3 Fiberglass at $400 and SPORT Bifins 3 Carbon at $505 (US list, October 2026), and the Molchanovs carbon bifins review covers the carbon version. Make that move once your kick is consistent and the polymer blade, not your technique, is the limit.

—— Frequently asked

Questions about
SEAC Motus Freediving Fins.

01 How does the SEAC Motus compare to the Cressi Gara Modular? +
Both are full-foot polymer long fins with interchangeable blades. SEAC quotes a 22 degree blade angle and sizes the Motus for 2-3 mm socks at your shoe size. Cressi rates the Gara Modular's polypropylene blade LD, which it calls soft, and lists the fin at $129.95 in the US. SEAC publishes no US list price or stiffness rating for the Motus, so compare current prices and try both pockets.
02 Does the SEAC Motus foot pocket run narrow or wide? +
SEAC does not publish a width. It describes a dual-density pocket, harder under the sole and softer at the back, and says to wear 2-3 mm socks with the same size as your everyday shoes. Fit depends on your foot, so check it with the socks you will dive in.
03 Can the Motus blades be replaced separately? +
Yes. SEAC describes the Motus blade as interchangeable, with blades in black and five camouflage colours.
04 Is the SEAC Motus a fiberglass fin? +
No. SEAC describes the blade as a special technopolymer chosen for flexibility and reactivity. Earlier versions of this review called it fiberglass in error.
—— Sources

What this article is based on

  1. PINNE MOTUS, Seac Sub SpaSEAC, 2026
  2. SPORT Bifins 3 FiberglassMolchanovs, 2026
  3. SPORT Bifins 3 CarbonMolchanovs, 2026