- + Sized for 40 kg of buoyancy thrust, the only buoyancy figure Salvimar publishes for its buoys
- + Flag included on a reinforced 50 cm shaft
- + Supplied with a 6 mm, 25 m floating rope
- + Velcro storage compartment and Cordura bands for fastening equipment
- + Inner chamber sold as a spare part (code 400504/A)
- − Listed as spearfishing gear; no fitting for a weighted dive line is described
- − Flag is 320 x 290 mm (12.6 x 11.4 in), under Florida's 12 x 12 inch minimum on one side
- − The replacement flag Salvimar lists is an Alpha flag, not the red divers-down symbol with a white stripe that Florida defines
- − No US list price found
Overview
Salvimar does not sell a product called a freediving buoy. Every buoy in its 2027 Buyer's Guide sits in the spearfishing section, and this page covers the Barchetta High Visibility: an inflatable board with a PVC inner chamber inside a high-strength nylon shell. Salvimar says it is sized for 40 kg of buoyancy thrust and meets visibility regulations, and it ships with a flag on a reinforced 50 cm shaft and a 6 mm, 25 m floating rope.
The supplied rope is a floating tow line, not a freediving depth line. For a weighted training line, the ring buoys from IST and Molchanovs document stainless D-rings under the buoy for the rope and weight. Salvimar describes Cordura bands for fastening equipment on the Barchetta, but no bottom D-ring.
The Salvimar Buoy Range
The Flag
Salvimar lists the Barchetta flag as 320 x 290 mm, about 12.6 x 11.4 inches, and its replacement part (400504/Z) as an Alpha flag. Florida's statute defines the divers-down symbol as a red square or rectangle with a white diagonal stripe and requires at least 12 x 12 inches when displayed from the water. The Barchetta flag falls short on its shorter side, so Florida divers should fly a separate compliant flag. The freediving and spearfishing guide covers the Florida rules in more detail.